Long Vuong Hoang, Minh Quang Chau


In this paper, the results of an overview of the formation of carbon permeability when using a number of different
permeable gases are presented. The most common permeable gases are “endo” gas and methanol. However, with
conditions in Vietnam with an extremely abundant gas source, the use of imported gases will cause enormous waste.
Therefore, in this study, we introduce the formation of the permeability medium of two “endo” and methanol gases.
In addition, the authors also presented an analysis of the formation of seepage environments from Vietnamese gas
sources. Research results show that the formation of permeability medium is suitable for imported gases.
Experimental results show that the use of Vietnamese gas for permeability is of the same quality as imported gases.

Full Text:



Collins, S.R., Schiroky, G.H., Marx, S.V., Williams, P.C. 2017. Concurrent flow of activating gas in low temperature carburization. Google Patents, 11-May-2017.

Horn, A., Merklein, M. 2018. Identification of a process window for tailored carburization of sheet metals in hot stamping, in AIP Conference Proceedings, 1960(1),160012.

Pham, X.D., Hoang, A.T., Nguyen, D.N. 2018. A Study on the Effect of the Change of Tempering Temperature on the Microstructure Transformation of Cu-Ni-Sn Alloy, Int. J. Mech. Mechatronics Eng., 18(4), 27–34.

Farhan, S., Wang, R., Li, K. 2016. Characterization of latticed SiC nanowires containing coating for carbon foam using carbonization activated pack cementation process, J. Alloys Compd., 682, 695–705.

Hoang, A.T., Nguyen, D.N., Pham, V.V. 2018. Heat Treatment Furnace For Improving The Weld Mechanical Properties: Design and Fabrication, Int. J. Mech. Eng. Technol., 9(6), 496–506.

Chang, H.L., Shen, T.Y., Lu, Y.C. 2016. Carbonization of metal caps. Google Patents, 05-Jul-2016.

Nguyen, D.N., Hoang, A.T., Sai, M.T., Chau, M.Q., Pham, V.V. 2018. Effect of Sn component on properties and microstructure Cu-Ni-Sn alloys, J. Teknol. 80(6), 43–51.

Al-Musa, A.A., Martynenko, V., Al-Saleh, M., Al-Zahrani, A., Kalinin, V., Shabunya, S. 2018. A Versatile Converter of Liquid Hydrocarbons for the Production of Reducing and Carbonization Atmospheres, Int. J. Chem. React. Eng., 16(12).

Liang, Y., Wei, J., Zhang, X., Zhang, J., Jiang, S.P., Wang, H. 2016. Synthesis of Nitrogen‐Doped Porous Carbon Nanocubes as a Catalyst Support for Methanol Oxidation, ChemCatChem, 8(11), 1901–1904.

Hoang, A.T., Nguyen, L.H., Nguyen, D.N. 2018. A Study of Mechanical Properties and Conductivity Capability of CU-9NI-3SN Alloy, International J. Appl. Eng. Res., 13(7), 5120–5126.

Bensabath, T., Monnier, H., Glaude, P.A. 2016. Detailed kinetic modeling of the formation of toxic polycyclic aromatic hydrocarbons (PAHs) coming from pyrolysis in low-pressure gas carburizing conditions, J. Anal. Appl. Pyrolysis, 122, 342–354.

Hoang, A.T., Pham, V.V. 2018. A review on fuels used for marine diesel engines, J. Mech. Eng. Res. Dev., 41(4), 22–32.

Wang, C.N., Huang, Y.F., Chai, Y.C., Nguyen, V. 2018. A Multi-Criteria Decision Making (MCDM) for Renewable Energy Plants Location Selection in Vietnam under a Fuzzy Environment, Appl. Sci., 8(11), 2069.

Yeoh, K.H., Shafie, S.A., Al-Attab, K.A., Zainal, Z.A. 2018. Upgrading agricultural wastes using three different carbonization methods: Thermal, hydrothermal and vapothermal, Bioresour. Technol., 265, 365–371.

Nguyen, D.N., Hoang, A.T., Pham, X.D., Sai, M.T., Chau, M.Q., Pham, V.V. 2018. Effect of sn component on properties and microstructure CU-NI-SN alloys, J. Teknol., 80(6).

Adams, S.M., Suleiman, I.Y. 2018. Original Research Article Effect of Carburization Time and Temperature on the Mechanical Properties of Mild Steel, Heat Treat., 3(2), 800–804.

Pauty, E., Bertoni, P., Dahlström, M., Larsson, M. 2018. Optimization of Low Pressure Carburizing and High Pressure Gas Quenching for Cr-alloyed PM parts, HTM J. Heat Treat. Mater., 73(2), 106–113.

Pashchenko, D. 2019. Numerical study of steam methane reforming over a pre-heated Ni-based catalyst with detailed fluid dynamics, Fuel, 236, 686–694.

Strezov, V., Anawar, H.M. 2018. Renewable Energy Systems from Biomass: Efficiency, Innovation and Sustainability. CRC Press.

Basso, D. 2016. Agro-industrial waste to solid biofuel through hydrothermal carbonization, Waste Manag., 47, 114–121.

Oree, V., Hassen, S.Z.S., Fleming, P.J. 2017. Generation expansion planning optimisation with renewable energy integration: A review, Renew. Sustain. Energy Rev., 69, 790–803.

Kumar, A. 2017. A review of multi criteria decision making (MCDM) towards sustainable renewable energy development, Renew. Sustain. Energy Rev., 69, 596–609.

Fathy, N.A. 2017. Carbon nanotubes synthesis using carbonization of pretreated rice straw through chemical vapor deposition of camphor, RSC Adv., 7(45), 28535–28541.

Alexandrino, A.C., de Sousa, J.F., de Souza, C.P., de Araújo, C.P.B., Souto, M.V.M. 2018. Synthesis and characterization of Mo2 C based materials over activated carbon derived from sewage sludge pyrolysis for catalytic applications, Cerâmica, 64(370), 148–155.

Zhang, C., Lu, F., Cheng, J., Qin, H., Zhu, B., Zhou, Q. 2018. Nano-Pt Skin Coated Carbonized Wood Chips with High Catalytic Activity for Electrocatalytic Oxidation of Methanol,” Int. J. Electrochem. Sci., 13(3), 2758–2765.


  • There are currently no refbacks.

Copyright © 2020 Plemillan Publishing Corporation. All rights reserved.