Tran Ngoc Thanh, Pham Tien Dat, Nguyen Duong Nam, Tran Thi Thanh Van


This paper presents the results of research about the using of composite materials to make circular rotating parts with two spherical ends. From the analysis of the working characteristics of this details, the article selected the winding technology and using composite materials to produce details with cylindrical and spherical shape characteristics. The material group that the article presents is a composite unidirectional glass fiber reinforced composite with polymer matrix. This material is characterized by a specific density of 2.02g/cm3; tensile strength is 1750MPa; elastic module is 55GPa; elongation reached 3.18%. With properties of such materials, it is suitable for working conditions of details.

Full Text:



Ahluwalia, R.K., Hua, T.Q., Peng, J.K. 2012. On-board and Off-board performance of hydrogen storage options for light-duty vehicles, in International Journal of Hydrogen Energy.

Hoang, A.T., Nam Nguyen, D., Pham, V.V. 2018. Heat treatment furnace for improving the weld mechanical properties: Design and fabrication, Int. J. Mech. Eng. Technol., 9(6), 496-506.

Zhang, M.Q., Rong, M.Z., Lu, X. 2005. Fully biodegradable natural fiber composites from renewable resources: All-plant fiber composites, Compos. Sci. Technol.

Gentilleau, B., Touchard, F., Grandidier, J.C. 2014. Numerical study of influence of temperature and matrix cracking on type IV hydrogen high pressure storage vessel behavior, Compos. Struct.

Firstov, S.A., Karpov, M.I., Korzhov, V.P., Gorban, V.F., Krapivka, N.A., Stroganova, T.S. 2015. Structure and properties of a laminated composite material made of high-entropy alloy with carbide and intermetallic hardening, Bull. Russ. Acad. Sci. Phys.

Riveiro, A. 2017. Laser cutting of Carbon Fiber Composite materials, Procedia Manuf.

Nguyen, D.N., Hoang, A.T., Sai, M.T., Chau, M.Q., Pham, V.V. 2018. Effect of Sn component on properties and microstructure Cu-Ni-Sn alloys, J. Teknol., 80(6), 43–51.

Dewidar, M.M., Lim, J.K. 2007. Manufacturing processes and properties of copper-graphite composites produced by high frequency induction heating sintering, J. Compos. Mater.

Peterson, P.F., Zhao, H., Niu, F., Huang, W., Schmidt, J., Schulte-Fischedick, J. 2006. Development of C-SiC ceramic compact plate heat exchangers for high temperature heat transfer applications, in AIChE Annual Meeting, Conference Proceedings.

Melro, A.R., Camanho, P.P., Andrade Pires, F.M., Pinho, S.T. 2013. Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I-Constitutive modelling, Int. J. Solids Struct.

Chang, R.R. 2000. Experimental and theoretical analyses of first-ply failure of laminated composite pressure vessels, Compos. Struct.

Cohen, D., Mantell, S.C., Zhao, L. 2001. The effect of fiber volume fraction on filament wound composite pressure vessel strength, Compos. Part BEngineering.

Panchangam, S.K., Generalis, G., Sundaresan, M.J. 1996. Influence of processing parameters on the strength of filament wound pressure vessels, in American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP.

Pinto, M., Shukla, A. 2017. Instabilities in Underwater Composite Structures, in Explosion Blast Response of Composites.

Ziegler, H. 2013. Principles of Structural Stability.

Solon, A.P. 2015. Pressure is not a state function for generic active fluids, Nat. Phys.

Dekker, R., Voogd, P., Van Asperen, E. 2007. Advanced methods for container stacking, in Container Terminals and Cargo Systems: Design, Operations Management, and Logistics Control Issues.

Fily, Y., Kafri, Y., Solon, A.P., Tailleur, J., Turner, A. 2018. Mechanical pressure and momentum conservation in dry active matter, J. Phys. A Math. Theor.

Pham, X.D., Hoang, A.T., Nguyen, D.N., Le, V.V. 2017. Effect of Factors on the Hydrogen Composition in the Carburizing Process, Int. J. Appl. Eng. Res., 12(19), 8238–8244.

Sulaiman, S., Borazjani, S., Tang, S.H. 2013. Finite element analysis of filament-wound composite pressure vessel under internal pressure, in IOP Conference Series: Materials Science and Engineering.

Ellul, B., Camilleri, D. 2015. The influence of manufacturing variances on the progressive failure of filament wound cylindrical pressure vessels, Compos. Struct.

Devillers, A.C.A., Oranje, A.P. 2006. Efficacy and safety of ‘wet-wrap’ dressings as an intervention treatment in children with severe and/or refractory atopic dermatitis: A critical review of the literature, British Journal of Dermatology.

Devillers, A.C.A., Oranje, A.P. 2012. Wet-wrap treatment in children with atopic dermatitis: A practical guideline, Pediatric Dermatology.

Trost, L., Elliott, D. 2012. Small intestinal submucosa urethral wrap at the time of artificial urinary sphincter placement as a salvage treatment option for patients with persistent/recurrent incontinence following multiple prior sphincter failures and erosions, Urology.

Krishna, A.M., Latha, G.M. 2011. Modeling the Dynamic Response of Wrap-Faced Reinforced Soil Retaining Walls, Int. J. Geomech.


  • There are currently no refbacks.

Copyright © 2020 Plemillan Publishing Corporation. All rights reserved.